A80 pax store configuration

Push file for transit 

On Pinpad go to settings -> Password: Pax9876@@

The file pushed will start downloading one it on ethernet.

Default password gets changed for setting: 9876

 

• Related Articles

• Router Change PAX machine configuration Procedure

  When customer is calling after router has changed or somehow their IP addresses in the network has changed. This Steps will help reconfigure the PAX machine with the correct IP address. Step:1  Ask if both the Pin Pad and Computer are on the same ...

• Pax A920 Setup

  After setting up everything in the pax store, then follow Step1 - Connect terminal to Wi-Fi or Sim-card with internet. Step2 - Open Pax store app on the terminal. Step3 - It should start downloading the file. - BroadPos Sierra  Step4 - Open that app ...

• Articles for Troubleshooting card related issues (PAX)

  Description : General problems faced by the card machine . Unable to connect card terminal ?? 1 . Identify whether the card machine type is '"PAX"  or   "Tripos" ( in admin > general settings )  If  its "'PAX" machine card type  , follow trouble ...

• Artcile to SET UP 'PAX' Configuration in Bottle POS app.

  Description : This article is how to configure settings of Customers using 'PAX' card machine in BOTTLE POS. Step 1 :  Install the Certificate : Use the below Link to download Bottle POS Certificate. Link ...

• How to go to App Update settings in PAX pin-pad?

  Note: This steps are for first time installation.  Step 1. Press F on this screen. Step 2. Press 1. (go to system settings) Step 3. Go to App Management. Step 4. First you have to Activate. After activated go to App Update and update.  Incase ...