Clean Pax Database and Update

Clean Pax Database and Update

For Pax SP30 & S300 

Step 1: Press F , Enter 1010
Step 2: Press 5, System Settings
Step 3: Press 5, Database
Step 4 : Enter 1010
Step 5: Select Clear database  > Select Yes > Select All Transactions
Step 6: Select 7. App Management  , Enter 1010
Step 7: Select 2. App update 


PAX A80 or A920: 
Launch TSYS App > Function > Settings > 1010 > other settings > clear all > Confirm

    • Related Articles

    • Articles for Troubleshooting card related issues (PAX)

      Description : General problems faced by the card machine . Unable to connect card terminal ?? 1 . Identify whether the card machine type is '"PAX"  or   "Tripos" ( in admin > general settings )  If  its "'PAX" machine card type  , follow trouble ...

    • How to go to App Update settings in PAX pin-pad?

      Note: This steps are for first time installation.  Step 1. Press F on this screen. Step 2. Press 1. (go to system settings) Step 3. Go to App Management. Step 4. First you have to Activate. After activated go to App Update and update.  Incase ...

    • Pax A920 Setup

      After setting up everything in the pax store, then follow Step1 - Connect terminal to Wi-Fi or Sim-card with internet. Step2 - Open Pax store app on the terminal. Step3 - It should start downloading the file. - BroadPos Sierra  Step4 - Open that app ...

    • Router Change PAX machine configuration Procedure

      When customer is calling after router has changed or somehow their IP addresses in the network has changed. This Steps will help reconfigure the PAX machine with the correct IP address. Step:1  Ask if both the Pin Pad and Computer are on the same ...

    • A80 pax store configuration

      Push file for transit  On Pinpad go to settings -> Password: Pax9876@@ The file pushed will start downloading one it on ethernet. Default password gets changed for setting: 9876