Error "Please Settle" on PAX Q30 or S300.
Reason
1.
Batch not Closed
2.
Terminal Memory Full
Troubleshooting
1.
Manually close the batch
2.
Clear the cache
Follow the below Steps for S300:-
1.
Press the Function key and 1.
2.
Select Host Settings
3.
In Host settings select close batch
4.
Select the Batch-all option.
You will get two options to select for closing the batch.
5. Press #1 and it works fine.
Follow the below Steps for Pax Q30:-
1.
Press 1 and the Green key to enter the main menu.
2.
Select the Batch close option.
Related Articles
Articles for Troubleshooting card related issues (PAX)
Description : General problems faced by the card machine . Unable to connect card terminal ?? 1 . Identify whether the card machine type is '"PAX" or "Tripos" ( in admin > general settings ) If its "'PAX" machine card type , follow trouble ...Pax A920 Setup
After setting up everything in the pax store, then follow Step1 - Connect terminal to Wi-Fi or Sim-card with internet. Step2 - Open Pax store app on the terminal. Step3 - It should start downloading the file. - BroadPos Sierra Step4 - Open that app ...Router Change PAX machine configuration Procedure
When customer is calling after router has changed or somehow their IP addresses in the network has changed. This Steps will help reconfigure the PAX machine with the correct IP address. Step:1 Ask if both the Pin Pad and Computer are on the same ...A80 pax store configuration
Push file for transit On Pinpad go to settings -> Password: Pax9876@@ The file pushed will start downloading one it on ethernet. Default password gets changed for setting: 9876Artcile to SET UP 'PAX' Configuration in Bottle POS app.
Description : This article is how to configure settings of Customers using 'PAX' card machine in BOTTLE POS. Step 1 : Install the Certificate : Use the below Link to download Bottle POS Certificate. Link ...